Prompts for Lesson Planning

7 ready-to-use ChatGPT prompts for lesson planning. Fill in the bracketed fields, paste into ChatGPT, and go.

Education · 7 prompts

01

Build a Secondary-School Lesson Plan

Create a secondary-school lesson plan with clear objectives, instruction flow, and useful checks for understanding.

You’ll needsubjectgrade levelclass durationlearning objectivematerialsconstraints
Prompt
You are an experienced secondary-school teacher.

Create a lesson plan using the context below.

Context:
- Subject: [subject]
- Grade level: [grade level]
- Class duration: [duration]
- Learning objective: [objective]
- Available materials: [materials]
- Constraints or classroom notes: [constraints]

Instructions:
1. Build a lesson with a strong opening, focused instruction, guided practice, and closing check.
2. Keep the pacing realistic for the stated class duration.
3. Include at least one student activity that reinforces the objective.
4. Add checks for understanding during the lesson, not only at the end.
5. Provide a brief differentiation note for students who need support or extension.

Output format:
- Lesson overview
- Learning objective
- Materials
- Lesson flow with timing
- Checks for understanding
- Differentiation note
- Homework or extension

Missing information policy:
Ask up to 2 concise questions only if the subject or grade level is unclear. Otherwise proceed with assumptions.

Quality bar:
- Classroom-ready.
- Realistic pacing.
- Objective-aligned activities.
02

Plan a One-Week Teaching Unit

Create a one-week teaching unit with daily objectives, progression, and assessment checkpoints.

You’ll needtopicgrade levelclass frequencyunit goalsassessment constraints
Prompt
You are a curriculum-minded classroom teacher.

Plan a one-week unit using the context below.

Context:
- Topic: [topic]
- Grade level: [grade level]
- Class frequency or schedule: [schedule]
- Unit goals: [goals]
- Assessment constraints: [constraints]

Instructions:
1. Break the week into a logical learning progression.
2. Give each session a clear objective tied to the unit goal.
3. Include key activities, practice, and quick assessment checks.
4. Make the week cumulative rather than a set of disconnected lessons.
5. Keep the sequence realistic for the stated schedule.

Output format:
- Unit overview
- Daily lesson arc
- Assessment checkpoints
- Materials or prep notes

Missing information policy:
Proceed with assumptions unless the topic or schedule is unclear.

Quality bar:
- Coherent progression.
- Practical daily scope.
- Clear assessment points.
03

Review a Lesson Plan for Cognitive Overload

Review a drafted lesson plan for cognitive overload, flagging where too many new concepts or steps are introduced at once and recommending what to cut, sequence differently, or scaffold.

You’ll needlesson plan draftlearner levelprior knowledge assumedtime availablelearning objective
Prompt
You are an instructional design reviewer checking for cognitive overload.

Review the lesson plan below.

Context:
- Lesson plan draft: [lesson plan]
- Learner level: [level]
- Prior knowledge assumed: [prior knowledge]
- Time available: [time]
- Learning objective: [objective]

Instructions:
1. Identify how many genuinely new concepts, terms, or steps the lesson introduces, and flag if that number is unrealistic for the learner level and time available.
2. Distinguish core content the objective actually requires from tangential content that could be cut or moved to a later lesson.
3. Check whether prior knowledge is truly assumed correctly, since a lesson that silently assumes an unlearned prerequisite will overload students regardless of pacing.
4. Recommend specific scaffolding (worked examples, chunking, visual aids) for the densest parts rather than a general "slow down" note.
5. Suggest what to cut first if the lesson genuinely can't fit everything in the time available.

Output format:
- New-concept count and overload assessment
- Core vs cuttable content
- Prior-knowledge assumption check
- Specific scaffolding recommendations
- Cut priority if time is too tight

Missing information policy:
Ask up to 2 concise questions only if the lesson plan or time available is unclear.

Quality bar:
- Concrete overload assessment, not a vague "seems like a lot."
- Distinguishes core from cuttable content.
- Recommends specific scaffolding, not general pacing advice.
04

Design an Exit Ticket That Actually Measures the Day's Objective

Create an exit ticket tightly tied to the day's specific learning objective, designed to give a clear signal on whether re-teaching is needed tomorrow.

You’ll needsubject and topictoday's specific learning objectivelearner leveltime available for the exit ticketformat preference
Prompt
You are an instructional designer creating a quick formative check.

Design an exit ticket using the context below.

Context:
- Subject and topic: [topic]
- Today's specific learning objective: [objective]
- Learner level: [level]
- Time available: [time]
- Format preference (written, quick poll, short answer): [format]

Instructions:
1. Write a question that directly measures today's specific objective, not a generic "what did you learn today" prompt that gives no actionable signal.
2. Keep it short enough to complete and collect in the last few minutes of class.
3. Design the response format so it's fast to scan across a whole class (not long written responses that take forever to read that night).
4. Include a clear threshold for what response quality signals "needs re-teaching tomorrow" versus "ready to move on."
5. Avoid a question so easy that everyone gets it right regardless of whether they actually learned the objective.

Output format:
- Exit ticket question(s)
- Fast-to-scan response format
- Re-teach vs move-on threshold

Missing information policy:
Ask up to 2 concise questions only if the objective or time available is unclear.

Quality bar:
- Directly measures today's specific objective.
- Fast to scan across a full class.
- Includes a clear re-teach threshold.
05

Plan a Project-Based Learning Lesson Sequence

Plan a project-based learning sequence with driving question, milestones, support checkpoints, and final product expectations.

You’ll needsubjectgrade levelproject themetime availablelearning goalsconstraints
Prompt
You are an experienced project-based learning teacher.

Plan a short project-based learning sequence using the context below.

Context:
- Subject: [subject]
- Grade level: [grade level]
- Project theme or driving question: [theme]
- Time available: [time]
- Learning goals: [goals]
- Constraints or classroom realities: [constraints]

Instructions:
1. Build a sequence that balances inquiry, structure, and realistic classroom management.
2. Include milestone checkpoints, mini-lessons, and feedback moments.
3. Make the final product or performance feel authentic to the topic.
4. Include supports for pacing and student accountability.
5. Keep the design realistic for the stated time available.

Output format:
- Project overview
- Learning goals and final product
- Sequence by session or phase
- Checkpoints and feedback plan
- Risks and support notes

Missing information policy:
Ask up to 2 concise questions only if the subject or grade level is unclear.

Quality bar:
- Realistic pacing.
- Strong milestone structure.
- Authentic student output.
06

Review Teaching Material from a Student Perspective

Review teaching material from a student perspective for clarity, cognitive load, accessibility, and likely confusion points.

You’ll needteaching materiallearner levellearning goalsknown student profiledelivery formatspecific concerns
Prompt
You are reviewing teaching material from a student perspective.

Use the context below.

Context:
- Teaching material or draft content: [material]
- Learner level: [level]
- Learning goals: [goals]
- Known student profile or support needs: [student profile]
- Delivery format: [format]
- Specific concerns or areas to inspect: [concerns]

Instructions:
1. Evaluate the material for clarity, pacing, cognitive load, and accessibility.
2. Flag where students are likely to misunderstand instructions, concepts, or expectations.
3. Surface hidden assumptions about prior knowledge.
4. Suggest concrete revisions that would improve comprehension without watering down rigor.
5. Keep the review practical for a teacher revising real materials.

Output format:
- Student-perspective review summary
- Likely confusion points
- Accessibility or cognitive-load issues
- Suggested revisions

Missing information policy:
Proceed with assumptions unless the teaching material or learner level are unclear.

Quality bar:
- Student-eye realism.
- Clear revision guidance.
- Preserved rigor.
07

Generate Lecture Slide Text from Lesson Material

Generate lecture slide text from lesson material with strong hierarchy, concise wording, and teaching-useful framing.

You’ll needlesson material or noteslearner levelsession goalslide count or scopetonemust-include points
Prompt
You are generating lecture slide text from lesson material.

Use the context below.

Context:
- Lesson material, readings, or notes: [materials]
- Learner level: [level]
- Session goal: [goal]
- Slide count or scope: [scope]
- Tone guidance: [tone]
- Must-include concepts or examples: [must include]

Instructions:
1. Turn the source material into concise slide-ready text rather than dense speaker notes.
2. Create a clear hierarchy across titles, supporting bullets, and emphasis points.
3. Preserve conceptual clarity without overloading each slide.
4. Include examples, questions, or framing cues only where they help teaching.
5. Keep the result practical for a real teaching deck.

Output format:
- Slide-by-slide outline
- Suggested slide titles
- Bullet text for each slide
- Optional presenter notes

Missing information policy:
Proceed with assumptions unless the lesson material or learner level are unclear.

Quality bar:
- Slide-ready brevity.
- Strong hierarchy.
- Teaching usefulness.